 |
|
|
 |
|
|
|
Since its introduction in 1993, this panel quickly became
our biggest seller. With 12 fuses, hazard and turn signal
flashers and a built-in horn relay, this panel will easily
provide all the circuits you need for the most
sophistocated rod. Separate power inputs for the battery,
ignition and accessory circuits are already wired into the
fuse panel. In addition, wires from the flashers and horn
relay to the steering column have also been built into the
panel. Since the wiring from the fuse panel is supplied
unterminated, this panel can easily be used with ANY
steering column. Finding a spot to mount this panel
won't be any problem as the unit requires only a 6.25 x
4.5 area. Panel is shipped with basic fuse panel
instructions.
For a complete harness kit order part number
9302HK
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you are building a 50's car, then this panel just may be
the best for you. With 10 fuses, hazard and turn flashers
and a built-in horn relay, it will easily handle the power
needs for your car. To keep the size of the panel down, a
five foot wiring harness has been built into the panel for
the battery, accessory and ignition power inputs. In
addition, wiring is included for the flashers and horn relay
to the steering column, brake switch and part of the
headlight switch. The terminal strip is used to make
connections from the fuses to your accessories. Total
mounting area required is only 6" x 5" with a depth of 2".
For a complete harness kit order part number 9301HK
9301 CLASSIC FUSE PANEL
9302FP ONLY $150.00
9301FP ONLY $130.00
